Metal corrugated pods are a tubular shape and surface of three undulating ribs to increase adhesion to concrete. Pod production according to project specifications. They are used in prefabricated pillars connections.
Materials
As a requirement, The production of the pods are made for formed by a cold laminated strap (Dc01), or, hot galvanized (DX51) To extend your useful life. Besides, Thanks to its triple undulating rib, an unbeatable adhesion to concrete is ensured.
Supports and templates
With the delineation of supports and templates, We ensure a correct placement of metal corrugated pods. We elaborate the designs based on the needs of the project. All templates are duly listed
Fixing anchors
The anchor screws serve to make a good connection of the structural elements for the foundation (prefabricated, Jácenas, elder, etc.). We define its specific use for prefabricated concrete structures and for the fixation of metal structures. The anchors transfers the force that is generated in the structure to the foundations or other concrete element by anchoring the same, be it by anchor by straight length (long anchor screws) or concrete cones (Short anchor screws).
Instructions for use
1. The pods are placed in each of the spoils of the templates.
2. Cover the lower and upper ends of the pods using plugs to avoid the introduction of concrete.
3. Position the pods through the separators to avoid displacements and guarantee verticality during concreting.
4.Concrete the element where the pods are housed to the upper surface of the pod. Once the concrete hardens, Remove the template.
5.Connect the concrete element with the pods. Fit the outgoing corrugated bars of the element to anchor inside the pods.
6.Make formwork for the filling of the Board and the pods through mortar without retraction.
